Temperature Control Euipment For Reactor

Product Detail

Heat Application- conducting Oil Heater in Temperature Control for Chemical Reactor

The reaction kettle temperature control effect is to determine the product quality, production efficiency. Under normal circumstances the application of temperature control use different temperature heat transfer oil directly into the reactor jacket, in order to adjust the temperature transfer to the reactor, this often makes the reactor jacket fluid quite chaotic, kettle Temperature is difficult to achieve the expected results. In response to reslove this problem, we design a reactor oil circulating heater, the principle is to use the heat transfer oil through the pump, the heat  through heat exchanger into the reactor, when it need to cool down, start the cooling system, at same time the heater stops working. Just to reach the temperature inside the reactor at the setting time, then it continue to keep the temperature, so only the usage of heat conducting oil heater can make the kettle temperature faster and more accurately to reach the best temperature.

Reactor temperature control machine, reactor heating oil circulation heating equipment selection parameters:

1, the size of the reactor;

2, the weight of reactor;

3, the reactor jacket or coil volume;

4, the reactor of the material parameters: density, specific heat, viscosity and so on

5, the reactor material required to achieve the temperature, and heating to the temperature of the time requirements;

6, reactor jacket is how much the import and export;

7, the need for refrigeration or explosion-proof;

8, whether the reactor can provide the drawings;







Model	Unit	HLET-10	HLET-20	HLET-30	HLET-40	HLET-50	HLET-75	HLET-100	HLET-150
Temp Range	?	Normal temperature-300?
Temp.Control Accuracy		PID±1?
Power Supply		AC3?380V   50HZ3P+E(5M)
Heat Transfer Medium		Qil
Cooling Method		Indirect Cooling
Expansion Tank Capacity	L	24	24	28	55	55	(100)	(150)	(250)
Heating Capacity	KW	18	18/24	24/36	36/50	40/60	50/75	80/100	100/150
Pump Power	KW	0.75	1.5	2.2	3.0	4.0	5.5	7.5	11.0
Pump Folw	L/MIN	1.5	1.5	10	12.5	16	12.5(18)	25(30)	12.8(18)
Pump Pressure	KG/CM2	2.2	2.2	2.8	3.0	3.2	5.0(4.0)	5.0(4.8)	8.7(7.0)
Power Supply	KW	13	20	28	40	50	62	132	162
Alert Function		Shortage/Overheating/Overload
Cooling Water Pipe	INCH	1/2	1/2	1/2	1/2	1/2	1/2	3/4	3/4
Circulation water Pipe	INCH	3/4	3/4	1	1-1/4	1-1/4	1-1/2	2	2.5
Size(L*W*H)	MM	L=1150   W=500   H=1000	L=1150   W=500   H=1000	L=1450   W=580   H=1250	L=1600   ,   W=630   H=1200	L=1600   W=550   H=1200	L=1600   W=550   H=1200	L=1600   W=600   H=1400	L=1600   W=600   H=1400